Rigol DS1000Z Series Especificaciones Pagina 139
- Pagina / 172
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 2 Command System RIGOL
DS1000Z Programming Guide 2-125
:TRIGger:IIC:WHEN
Syntax :TRIGger:IIC:WHEN <trig_type>
:TRIGger:IIC:WHEN?
Description
Set or query the trigger condition in I2C trigger.
Parameter
Name
Type
Range
Default
<trig_type> Discrete
{STARt|RESTart|STOP|NACKnowledge|ADD
Ress|DATA|ADATa}
STARt
Explanation STARt: trigger when SDA data transitions from high to low while SCL is high.
RESTart: trigger when another start condition occurs before a stop condition.
STOP: trigger when SDA data transitions from low to high while SCL is high.
NACKnowledge: trigger when the SDA data is high during any acknowledgement
of SCL clock position.
ADDRess: trigger on the clock (SCL) edge corresponding to the byte of data
(SDA) behind the preset address (Write, Read or R/W direction).
DATA: the trigger searches for the control byte value on the data line (SDA)
following which there is a reading bit and an acknowledgement bit and then
searches for the specified data value. When this event occurs, the oscilloscope
will trigger on the clock edge of the acknowledgement bit behind the data byte.
ADATa: trigger when the “Address” and “Data” conditions are met at the same
time.
Return Format
The query returns STAR, STOP, NACK, REST, ADDR, DATA or ADAT.
Example
:TRIGger:IIC:WHEN RESTart
:TRIGger:IIC:AWIDth
Syntax :TRIGger:IIC:AWIDth <bits>
:TRIGger:IIC:AWIDth?
Description Set or query the address bits when the trigger condition is ADDRess or ADATa in I2C
trigger.
Parameter
Name
Type
Range
Default
<bits>
Discrete
{7|8|10}
7
Return Format
The query returns 7, 8 or 10.
Example
:TRIGger:IIC:AWIDth 10
Related
Command
:TRIGger:IIC:DIRection
:TRIGger:IIC:ADDRess
- Programming Guide 1
- Guaranty and Declaration 3
- Document Overview 4
- Contents 5
- RIGOL Contents 6
- Contents RIGOL 7
- DS1000Z Programming Guide V 7
- Remote Control Methods 12
- SCPI Command Overview 13
- Parameter Type 14
- Command Abbreviation 14
- Chapter 2 Command System 15
- :AUToscale 16
- :SINGle 17
- :TFORce 17
- :ACQuire Commands 18
- :ACQuire:MDEPth 19
- :ACQuire:TYPE 20
- :CALibrate Commands 21
- :CHANnel<n> Commands 22
- :CHANnel<n>:COUPling 23
- :CHANnel<n>:DISPlay 23
- :CHANnel<n>:INVert 23
- :CHANnel<n>:OFFSet 24
- :CHANnel<n>:RANGe 24
- :CHANnel<n>:TCAL 25
- :CHANnel<n>:SCALe 26
- :CHANnel<n>:PROBe 26
- :CHANnel<n>:UNITs 27
- :CHANnel<n>:VERNier 27
- :CURSor Commands 28
- :CURSor:MANual 29
- :CURSor:MANual:SOURce 30
- :CURSor:MANual:TUNit 30
- :CURSor:MANual:VUNit 30
- :CURSor:MANual:AX 31
- :CURSor:MANual:BX 31
- :CURSor:MANual:AY 31
- :CURSor:MANual:BY 32
- :CURSor:MANual:AXValue? 32
- :CURSor:MANual:AYValue? 32
- :CURSor:MANual:BXValue? 32
- :CURSor:MANual:BYValue? 33
- :CURSor:MANual:XDELta? 33
- :CURSor:MANual:IXDELta? 33
- :CURSor:MANual:YDELta? 33
- :CURSor:TRACk 34
- :CURSor:TRACk:AX 35
- :CURSor:TRACk:BX 35
- :CURSor:TRACk:AY? 35
- :CURSor:TRACk:BY? 36
- :CURSor:TRACk:AXValue? 36
- :CURSor:TRACk:AYValue? 36
- :CURSor:TRACk:BXValue? 36
- :CURSor:TRACk:BYValue? 37
- :CURSor:TRACk:XDELta? 37
- :CURSor:TRACk:IXDELTA? 37
- :CURSor:AUTO:ITEM 38
- :CURSor:XY 39
- :CURSor:XY:AY 40
- :CURSor:XY:BY 40
- :CURSor:XY:AXValue? 40
- :CURSor:XY:AYValue? 41
- :CURSor:XY:BXValue? 41
- :CURSor:XY:BYValue? 41
- :DISPlay Commands 42
- :DISPlay:DATA? 43
- :DISPlay:TYPE 44
- :DISPlay:GRADing:TIME 44
- :DISPlay:WBRightness 44
- :DISPlay:GRID 45
- :DISPlay:GBRightness 45
- IEEE488.2 Common Commands 46
- a decimal integer 48
- :MATH Commands 49
- :MATH:DISPlay 50
- :MATH:OPERator 50
- :MATH:SOURce1 50
- :MATH:SOURce2 51
- :MATH:SCALe 51
- :MATH:OFFSet 52
- :MATH:INVert 52
- :MATH:RESet 52
- :MATH:FFT:WINDow 53
- :MATH:FFT:SPLit 53
- :MATH:FFT:UNIT 54
- :MATH:FFT:HSCale 54
- :MATH:FFT:HCENter 55
- :MATH:OPTion:STARt 55
- :MATH:OPTion:END 56
- :MATH:OPTion:INVert 56
- :MATH:OPTion:SENSitivity 57
- :MATH:OPTion:DIStance 57
- :MATH:OPTion:ASCale 57
- :MATH:OPTion:THReshold1 58
- :MATH:OPTion:THReshold2 58
- :MASK Commands 59
- :MASK:SOURce 60
- :MASK:OPERate 60
- :MASK:MDISplay 61
- :MASK:SOOutput 61
- :MASK:OUTPut 62
- :MASK:X 62
- :MASK:Y 62
- :MASK:CREate 63
- :MASK:PASSed? 63
- :MASK:FAILed? 63
- :MASK:TOTal? 63
- :MASK:RESet 63
- :MEASure Commands 64
- Source 1 65
- Source 2 65
- :MEASure:SOURce 67
- :MEASure:COUNter:SOURce 67
- :MEASure:COUNter:VALue? 67
- :MEASure:CLEar 68
- :MEASure:RECover 68
- :MEASure:ADISplay 69
- :MEASure:AMSource 69
- :MEASure:SETup:MAX 70
- :MEASure:SETup:MID 70
- :MEASure:SETup:MIN 71
- :MEASure:SETup:PSA 71
- :MEASure:SETup:PSB 72
- :MEASure:SETup:DSA 72
- :MEASure:SETup:DSB 72
- :MEASure:STATistic:DISPlay 73
- :MEASure:STATistic:MODE 73
- :MEASure:STATistic:RESet 74
- :MEASure:STATistic:ITEM 74
- :MEASure:ITEM 75
- :REFerence Commands 76
- :REFerence<n>:SOURce 77
- :REFerence<n>:VSCale 77
- :REFerence<n>:VOFFset 78
- :REFerence<n>:RESet 78
- The default unit is V 89
- :SYSTem Commands 90
- :SYSTem:ERRor[:NEXT]? 91
- :SYSTem:GPIB 91
- :SYSTem:LANGuage 91
- :SYSTem:LOCKed 91
- :SYSTem:PON 92
- :SYSTem:OPTion:INSTall 92
- :SYSTem:OPTion:UNINSTall 92
- :TIMebase Commands 93
- :TIMebase:DELay:SCALe 94
- :TIMebase[:MAIN]:OFFSet 94
- :TIMebase[:MAIN]:SCALe 95
- :TIMebase:MODE 95
- :TRIGger Commands 96
- :TRIGger:COUPling 97
- :TRIGger:STATus? 97
- :TRIGger:SWEep 97
- :TRIGger:HOLDoff 98
- :TRIGger:NREJect 98
- :TRIGger:EDGe 99
- :TRIGger:EDGe:LEVel 100
- :TRIGger:PULSe 101
- :TRIGger:PULSe:WIDTh 102
- :TRIGger:PULSe:UWIDth 102
- :TRIGger:PULSe:LWIDth 103
- :TRIGger:PULSe:LEVel 103
- :TRIGger:SLOPe 104
- :TRIGger:SLOPe:TIME 105
- :TRIGger:SLOPe:WHEN 105
- :TRIGger:SLOPe:TUPPer 106
- :TRIGger:SLOPe:TLOWer 106
- :TRIGger:SLOPe:WINDow 107
- :TRIGger:SLOPe:ALEVel 107
- :TRIGger:SLOPe:BLEVel 108
- :TRIGger:VIDeo 109
- :TRIGger:VIDeo:MODE 110
- :TRIGger:VIDeo:LINE 110
- :TRIGger:VIDeo:STANdard 111
- :TRIGger:VIDeo:LEVel 111
- :TRIGger:PATTern 112
- :TRIGger:PATTern:LEVel 113
- :TRIGger:DURATion 114
- :TRIGger:DURATion:WHEN 115
- :TRIGger:DURATion:TUPPer 115
- :TRIGger:DURATion:TLOWer 116
- :TRIGger:TIMeout (Option) 117
- :TRIGger:TIMeout:TIMe 118
- :TRIGger:RUNT (Option) 119
- :TRIGger:RUNT:WHEN 120
- :TRIGger:RUNT:WUPPer 120
- :TRIGger:RUNT:WLOWer 121
- :TRIGger:RUNT:ALEVel 121
- :TRIGger:RUNT:BLEVel 122
- :TRIGger:WINDows (Option) 123
- :TRIGger:WINDows:POSition 124
- :TRIGger:WINDows:TIMe 124
- :TRIGger:WINDows:ALEVel 125
- :TRIGger:WINDows:BLEVel 125
- :TRIGger:DELay (Option) 126
- :TRIGger:DELay:SLOPB 127
- :TRIGger:DELay:TYPe 127
- :TRIGger:DELay:TUPPer 128
- :TRIGger:DELay:TLOWer 128
- :TRIGger:SHOLd (Option) 129
- :TRIGger:SHOLd:PATTern 130
- :TRIGger:SHOLd:TYPe 130
- :TRIGger:SHOLd:STIMe 131
- :TRIGger:SHOLd:HTIMe 131
- :TRIGger:NEDGe (Option) 132
- :TRIGger:NEDGe:IDLE 133
- :TRIGger:NEDGe:EDGE 133
- :TRIGger:NEDGe:LEVel 133
- :TRIGger:RS232 (Option) 134
- :TRIGger:RS232:WIDTh 136
- :TRIGger:RS232:BAUD 136
- :TRIGger:RS232:BUSer 136
- :TRIGger:RS232:LEVel 137
- :TRIGger:IIC (Option) 138
- :TRIGger:IIC:WHEN 139
- :TRIGger:IIC:AWIDth 139
- :TRIGger:IIC:CLEVel 141
- :TRIGger:IIC:DLEVel 141
- :TRIGger:SPI (Option) 142
- :TRIGger:SPI:WHEN 143
- :TRIGger:SPI:WIDTh 143
- :TRIGger:SPI:DATA 143
- :TRIGger:SPI:TIMeout 144
- :TRIGger:SPI:SLOPe 144
- :TRIGger:SPI:CLEVel 144
- :TRIGger:SPI:DLEVel 145
- :WAVeform Commands 146
- :WAVeform:SOURce 147
- :WAVeform:MODE 148
- :WAVeform:FORMat 148
- :WAVeform:DATA? 149
- :WAVeform:XINCrement? 150
- :WAVeform:XORigin? 150
- :WAVeform:XREFerence? 150
- :WAVeform:YINCrement? 151
- :WAVeform:YORigin? 151
- :WAVeform:YREFerence? 151
- :WAVeform:STARt 152
- :WAVeform:STOP 152
- :WAVeform:PREamble? 153
- Chapter 3 Programming Demos 155
- Programming Preparations 156
- Excel Programming Demo 157
- Matlab Programming Demo 161
- LabVIEW Programming Demo 163
- Visual C++ Programming Demo 169
Relacionado con productos y manuales para De medición, control y control Rigol DS1000Z Series
(97 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.020 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales