Rigol DS1000CA series Guía de usuario descargar pdf (Pagina 120)

RIGOL

User‟s Guide for DS1000CA Series

3-4

Example 4: To Reduce the Random Noise on a Signal

If the signal is noisy (Figure 3-2), set up the oscilloscope to reduce the noise on the

waveform and avoid its interference to the signal.

Figure 3-2 Signal with noise

1. Set the probe and the channel attenuations to 10X.

2. Connect a signal to the oscilloscope and obtain a stable display.

3. Improve the trigger by setting the Coupling.

(1) Press the MENU in the Trigger control area.

(2) Press Set Up→Coupling→LF Reject or HF Reject.

HF Reject (High frequency reject) adds a low pass filter with the -3 dB cut-off

point at 150 kHz. Use HF rejects to remove high frequency noise such as AM or

FM broadcast stations from the trigger path.

LF Reject (Low frequency reject) adds a high pass filter with the -3 dB cut-off

point at 8 kHz. Use LF Reject to remove low frequency signals such as power

line noise from the trigger path.

4. To reduce the noise by setting the acquisition type and adjust the waveform

intensity.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 145 146

Sin comentarios

Rigol DS1000CA series Guía de usuario Pagina 120