Rigol DM3058 Manual de usuario descargar pdf (Pagina 159)

RIGOL

Programming Guide for DM3058/DM3058E

5-10

The command enables the multimeter exit Touch Hold mode and back to its

normal state.

6. HOLDTHRESH

Command Format:

HOLDTHRESH <threshold>

HOLDTHRESH?

Function:

The commands set and query the threshold for HOLD measurement.

Explanations:

HOLDTHRESH <threshold> - Sets the HOLD threshold to <threshold>,

<threshold> should be 1, 2, 3 or 4 (which are 0.01%, 0.1%, 1%, 10%,

respectively), or else errors may occur.

HOLDTHRESH? - Queries the threshold of HOLD measurement.

Return Format:

The query returns the HOLD threshold 1, 2, 3 or 4.

7. MAX

Command Format:

MAX

Function:

The command enables the multimeter enter MAX operation with current reading

as maximum.

Explanations:

If the multimeter has been in MAX mode, the maximum value will be shown on

the screen. Note the auto range function is disabled in this mode.

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 191 192

Sin comentarios

Rigol DM3058 Manual de usuario Pagina 159