Rigol DS2000A Series Especificaciones Pagina 360

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 390
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 359
RIGOL 2 Command System
2-344 MSO2000A/DS2000A Programming Guide
:WAVeform:SOURce
:WAVeform:MODE
:WAVeform:FORMat
:WAVeform:POINts
:WAVeform:DATA?
:WAVeform:XINCrement?
:WAVeform:XORigin?
:WAVeform:XREFerence?
:WAVeform:YINCrement?
:WAVeform:YORigin?
:WAVeform:YREFerence?
:WAVeform:STARt
:WAVeform:STOP
:WAVeform:BEGin
:WAVeform:END
:WAVeform:RESet
:WAVeform:PREamble?
:WAVeform:STATus?
:WAVeform:SOURce
Syntax
:WAVeform:SOURce <source>
:WAVeform:SOURce?
Description
Set or query the channel source of waveform data reading.
Parameter
Name Type Range Default
<source> Discrete {CHANnel1|CHANnel2|MATH|FFT|LA} CHANnel1
Explanation
The following two methods can be used to set FFT as the channel source for waveform data reading.
Set <source> to FFT.
Set the operation source of MATH to FFT and then set <source> to MATH.
When LA is set as the channel source of waveform data reading, the return format is WORD; namely,
each 2 bytes represent a group of digital signal states and each bit represents a single digital signal
channel. The highest bit represents D0 and the lowest bits represents D15.
Return Format
The query returns CHAN1, CHAN2, MATH, FFT or LA.
Vista de pagina 359
1 2 ... 355 356 357 358 359 360 361 362 363 364 365 ... 389 390

Comentarios a estos manuales

Sin comentarios