Rigol DS1000MD Especificaciones descargar pdf (Pagina 51)

Chapter 5 Disassembly and Assembly RIGOL

Service Guide for DS1000E, DS1000D Series

5-9

Disassemble and Assemble LCD and the

Keyboard

Figure 5-6 Disassemble and assemble LCD and the keyboard

Parts Explanations:

⑫ Bolts for the screen ground wire (M2*4 Pan head Torx recess machine screws): 1

⑬ Bolts fixed on the keypad board (M3*6 Flush head Torx recess machine screws): 4

Disassemble steps:

1. Pull out the LCD wire from the J603 interface of the mainboard;

2. Backout the one bolt of the screen ground wire using a TORX driver (T6);

3. Take out the LCD screen gently (Be careful the screen cable and ground wire);

4. Backout the keypad board cable from the J604 interface of the mainboard;

5. Backout the four bolts ⑬ from the keypad board using a TORX driver (T10); the

moment of force is 6 NM;

6. Take out the keypad board gently (pay attention to the wire).

⑫

⑬

Keyboard

Rubber Button

Tank Body

LCD

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 62 63

Sin comentarios

Rigol DS1000MD Especificaciones Pagina 51