Rigol DS1000M Guía de usuario descargar pdf (Pagina 118)

RIGOL

2-88 © Copyright RIGOL Technologies, Inc. 2007.

User’s Guide for DS1000 Series

Service

Press Utility→Service to go to the following menu.

Figure 2-107 Table 2-71

Menu Settings

System Info Press to display system information.

Screen Test Press to run screen test program.

Color Test Press to run color test

Key Test Press to run keypad test program.

1. System Info:

Press this soft button to display the information of oscilloscope. It contains Model,

Power up times, Serial No., Software version and Installed module of the oscilloscope.

And you could follow the prompting message of “<<Press ‘RUN’ Key to Exit the

Test>>" to exit this interface.

2. Screen Test:

Press this soft button to run Screen Test program. The screen turns black or white in

sequence (Mono) and the screen turns red, green and blue in sequence (Color) when

keep pressing the RUN/STOP button. You could check the screen for display failures.

3. Color Test:

Select Color Test into color test screen, the hue, saturation, brightness, or red, green

and blue components can be adjusted by turning (

), confirm selection by pushing

( ) knob.

4. Key Test:

Press this soft button to run Keyboard Test program and start the keyboard test

routine. The blocks represent the buttons on the front-panel; the rectangular boxes

with two arrows beside represent the knobs on the front-panel; the square boxes

represent the pressing function for the

knobs. Test all keys and knobs,

and check the blocks on the screen response whether or not.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 167 168

Sin comentarios

Rigol DS1000M Guía de usuario Pagina 118