Rigol M300 Manual de usuario descargar pdf (Pagina 9)

Chapter 1 Programming Overview RIGOL

Programming Guide for DM3000

1-3

Symbol Description

1. Colon :

The command string usually starts with a colon (:) which is also used to separate

command keyword and lower-level keyword.

2. Question Mark ?

A command followed by a question mark (?) is used to query the function under this

command. A query command usually contains different data, and these data are

separated by spaces. However, there are also some commands that do not contain

any data.

3. Comma ,

“,” is used to separate different types of parameters contained in a command. For

example,

:DATAlog:CONFigure:FUNCtion {<DCV|DCI|RESistance|FRESistance>,<range>}

4. Braces { }

The contents enclosed in braces are parameters. If the parameters are separated by a

vertical line (|), only one parameter can be selected at a time. For example, {ON|OFF}

indicates that either ON or OFF can be used.

5. Triangle Brackets < >

The parameter enclosed in the triangle brackets must be replaced by an effective

value which will be used as the data parameter of the command.

6. Square brackets [ ]

The parameters or command keywords enclosed in square brackets ([ ]) are optional

or could be ignored. The square brackets ([ ]) will not be sent with the command. If

none of the parameters are specified, the system will use a default. For example,

CONFigure[:VOLTage][:DC]

[{<range>|AUTO|MIN|MAX|DEF}[,{<resolution>|MIN|MAX|DEF}]]

If all the parameters enclosed in the square brackets are set to their defaults, the

command can be abbreviated to:

CONFigure

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 88 89

Sin comentarios

Rigol M300 Manual de usuario Pagina 9