Rigol DM3058 Manual de usuario descargar pdf (Pagina 65)

RIGOL

User’s Guide for DM3058/DM3058E

2-43

Short-circuit Resistance

Set up the short-circuit resistance value in the short-circuit test menu. When the

measured resistance is lower than the short-circuit resistance, the circuit is

considered as connected, and the beeper sounds (if sound is on). The

short-circuit resistance is only applicable to the continuity test.

Press  Conti, enter the menu shown below:

Figure 2-59 Set up the short-circuit resistance

Use direction keys to change the parameter values:

Press left and right directional keys to choose different digits. Press up and down

keys to change the current digit value.

Continue Resistance

 The range of short-circuit resistance is 1Ω~2000Ω. The default value is

10Ω.

 The short-circuit resistance value is stored in the nonvolatile memory and

the resistance remains unchanged after power-off.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 137 138

Sin comentarios

Rigol DM3058 Manual de usuario Pagina 65