Rigol DM3058 Manual de usuario descargar pdf (Pagina 110)

RIGOL

User’s Guide for DM3058/DM3058E

3-12

Example 8: Store and Recall the Preset

Suppose the input power supply is AC 220V, output is DC12V, error is permitted

within ±0.5V during testing the power supply.

Operating Steps:

1. Press and then select 750V level by Rng+/- or Up/Down direction keys.

Figure 3-28 Manual measure interface

2. Save settings into Set1.

Press to enter Preset menu as shown in the figure below.

Figure 3-29 Preset menu interface

Press  Set1 and store these settings into the first System Configuration

file, then press

Figure 3-30 Configuration save interface

3. Press and then select 20V level by Rng+/- or Up/Down direction keys to

test output voltage.

4. Open P/F operation, set High limit as 12.5V and Low limit as 11.5V so as to test

whether the output DC 12V is exceed or not.

5. Save settings in step 3&4 to Set2 by using the method shown in step 2.

Now the preset storage is finished. Press  Set1 or Set2 to recall the

settings when needed in later applications.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 137 138

Sin comentarios

Rigol DM3058 Manual de usuario Pagina 110