Rigol M300 Manual de usuario descargar pdf (Pagina 134)

RIGOL

User’s Guide for DM3000 Series

5-14

[1] Specifications are for 60 minute warm–up and select 5 3/4 reading resolution.

[2] 20% over range on all ranges, except DCV 1000V, ACV 750V, DCI and ACI 10A range.

[3] Specifications are for sine wave input >5% of range. For inputs from 1% to 5% of range and <50 kHz,

add 0.1% of range additional error. For 50 kHz to 100 kHz, add 0.13% of range.

750 Vac range limited to 100 kHz or 8x10

Volt-Hz.

[4] Specifications are for sine wave input >5% of range. Add 0.1% of the range for the sine wave input is

1%~5% of the range.

[5] For current terminal, > 7A DC or ACRMS for 30 seconds ON and 30 seconds OFF.

[6] Typically 30% of reading error at 100kHz.

Low Frequency Performance

Three filter settings are available:

Slow: 3Hz~100kHz

Mid: 20Hz~100kHz

Fast: 200Hz~100kHz

Frequencies greater than these filter settings are specified with no additional errors.

Settling Considerations

Applying >300VRMS (or >1ARMS) will cause self-heating in signal-conditioning components. These errors are

included in the instrument specifications. Internal temperature changes due to self-heating may cause additional

error on lower ac voltage ranges. The additional error will be less than 0.02% of reading and will generally

dissipate within a few minutes.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 143 144

Sin comentarios

Rigol M300 Manual de usuario Pagina 134