Rigol DS6000 Series Manual de usuario descargar pdf (Pagina 52)

RIGOL

16 User’s Guide for RP7000 Series Active Probe

① Turning the roller to adjust the spacing (0mm to 5.5mm) between the two

probe tips.

② Hand-held differential probe head (RP7-0204).

③ 91Ω probe tip (RP7-0405).

2. Hand-held Single-ended Probe Head

The hand-held single-ended probe head provides an effective bandwidth of

more than 1.5GHz. Besides, the spacing between the single-ended ground

collar and probe tip can be adjusted by rotating the ground collar and the

replaceable probe tip and single-ended ground collar prolong the service life of

the probe.

The hand-held single-ended probe head can be used to measure single-ended

signal. During the measurement, the single-ended ground collar must be

grounded. Pay attention to their polarities when connecting the probe head and

active probe amplifier.

The structure of the hand-held single-ended probe head is as shown in Figure

10.

Figure 10 Hand-held Single-ended Probe Head

①

②

③

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 62 63

Sin comentarios

Rigol DS6000 Series Manual de usuario Pagina 52